The Right Way to Clean Fire Pumps

Fire pump, as the important equipment in the fire pump field, its quality was the key to decide the fire safety. When the fire pump was placed for a long time, there will be some problems, for example, sanitation, clogging, and corrosion. So fire pump, in fact, needs to be cleaned. Grasping the right way to clean fire pumps is necessary.

In order to remove surface stains more quickly, some cleaning products such as detergents are used to clean the fire pump, but in fact, such direct-cleaning method is absolutely wrong. such corrosive products in the long term are used to clean the surface of the fire pump, it will only increase the corrosion of the surface of the fire pump. The main components of the fire pump cannot be washed with water, and water enters the motor, which is easy to cause the short circuit. Therefore, many people think that the fire pump cannot be directly cleaned, and to ask the professional factory staff for cleaning, but in fact, it is not necessary.

So how to clean the fire pump? What is the right way to clean? First of all, use a towel dampened with water, the so-called wet towel, wipe off the surface of the fire pump, and pay attention to the contact parts of small parts to see if there is a blockage caused by a large amount of ash layer accumulation. Secondly, use dry towel wipes the water on the surface of the fire pump so that the fire pump can be better protected.

In addition, as for the different types and applications of fire pumps, parts cleaning can also be carried out. For example, the cleaning of the fire pump impeller, pay more attention to the scale and rust accumulated on the inner and outer surfaces of the impeller, seal rings and bearings, such as the cleaning of water seal pipes, pay attention to whether the pipe is blocked, such as the ball bearing application of gasoline cleaning and so on.

The fire pump is a mechanical device. When the mechanical equipment has been placed for a long time, it needs to be paid attention. The proper cleaning is beneficial to the fire pump to improve work efficiency, and also extend the life period and control the cost for the user.