Some Precautions Before Starting Fire Pump

What are the precautions before the fire pump start? Generally, before using, it is necessary to check the status of the fire pump first, including the following aspects:

1. Check if the fire pump can work properly

   When testing the fire pump, the return valve should be fully open, and the valve should be closed, and then restored to the normal position after the trial. In addition, when you need water or when it is an emergency, open the valve at the desired position to see if it is normal. In addition, the inlet valve of the fire pump is required to be opened, and it must be ensured that there is always one opened, and the outlet valve is to be closed.

   

2. Check the handle of the fire pump clutch

   The scientific way to use the fire pump is to check the handle of the fire pump clutch before the operation because the handle that needs to be in the combined state under normal conditions. Therefore, make sure to check if it is closed before using the fire pump.

   

3. Check the deflation valve

   Before using the fire pump, you need to open the deflation valve of the fire pump to reset the float assembly, prepare for starting, and then close the deflation valve.