How to use the fire pump safely?
Because the fire pump plays a great role in fire safety, a slight error will bring unpredictable consequences. More leather is the time when our situation is fast and fire.
Therefore, the fire pump needs to do the following during the operation:
- In the case of driving, it is necessary to do a close inspection.
- In the process of management. Fire pump, diesel fire pump, vertical fire pump, fire pump manufacturer, electric fire pump, fire pump manufacturer
- Vertical fire pump, when the instrument is not in use, the construction of the embankment and maintenance of the opposite side of the building should be on time inspection.
In the use of fire pumps, the most important thing is to use the specifications. This is, fire pump manufacturers should put it in a place that is good for ventilation, because the heat will be faster, or help the temperature of the motor to drop, otherwise, if the skill of running the service is too long, then the motor will have a title, high temperature may Discard the motor. For example, some users, in the application, did not remove the plastic film on the motor in advance, so that the motor is running continuously, the temperature is slowly heating up, but there is no cooling time, then the motor will show off obstacles and burn the coil. Thus, the temperature of the motor is a big headline.
During the start-up process, the fire pump manufacturer must check whether the amount of water accumulated in the pump is lavish, and the electric fire pump will not have its own stagnation function, and it is also very likely to abandon the shaft seal. Under the wide-ranging ring, when the instrument is launched, it will inevitably be the first to return in five minutes. If there is no water in the progress time, then there is bound to be a problem. At this time, the machinery should be stopped and the specific introspection should be held.