It is well known that the use of fire pumps is affected by the installation. Whether the installation is correct or not, the details are in place, which seriously affects the use effect and lifespan of the fire pump.

These fire pump installation details you need to know

First of all, with the development of science and technology, the technology of the current fire pump is more and more advanced, and the vibration is not as large as before. Therefore, it is recommended to install the fire pump bottom plate directly on the pre-cast cement foundation to meet the requirements for use. In terms of such a form of operation, it is suitable for varieties of occasions. In order to reduce the vibration to a greater extent, in the general hotel, office building, and special requirements, anti-vibration installation can be used. That is, a connecting plate is placed under the pump bottom plate, then placed on the four vibration isolators, and then install it tightly on the cement base with bolts.

Secondly, according to the fire pump installation instructions and the corresponding installation dimensions, prepare the installation materials, such as anchor bolts, flat washers, nuts, spring washers, etc., and prepare the cement foundation according to the installation method, and pre-bury the anchor bolts. After the cement foundation is stabilized, it is recommended to clear the surface of the debris.

In addition, in order to remove the oil traces and dirt on the fire pump bottom plate in the future, according to the requirements of the installation drawings, lift the water pump to the basic installation position, find the direction of the inlet and outlet, put the washers and spring washers on the bolts, and then tighten the nut.

Finally, in order to facilitate the failure of the fire pump in the future, it is recommended to install a regulating valve on each of the inlet and outlet pipes. In addition, a pressure gauge is installed at the pump outlet to adjust and ensure that the fire pump is within the rated flow and lift range. run. This type of operation helps to increase the life of the pump.

Better Technology Co., Ltd., focusing on fire pumps for more than 15 years, is familiar with the use and installation of fire pumps. The company has a complete set of strategies for any fire pump sold, from installation to after-sales service.